Jabra CRUISER2 Bluetooth In-Car Speakerphone

The Jabra CRUISER2 Bluetooth in-car speakerphone makes hands-free in-car calls even easier. To start with, its voice gives you simple pairing instructions the first time you turn it on. After that you just put it on your sun-visor and it connects automatically with your mobile phone every time. It will even synchronize with your phonebook, enabling the CRUISER2 to say the names of the contacts in your phonebook when they call.

When you answer, Jabra's Noise Blackout technology and a dual microphone system ensure the conversation always sounds just right. And you won't run out of charge because its voice will tell you when it needs more power. It's also equipped with an FM Transmitter and A2DP Bluetooth profile, which allow you to stream your music from your phone to the car stereo.

Key Features

• Acoustically optimized design with Noise Blackout dual microphones and a powerful speaker
  
• Easy to install. Pair to your phone and place on your sun visor. Then you are ready to drive responsibly
  
• Connect it to your car radio with the FM transmitter and transmit your music and calls to your car speakers
  
• Play music from your Bluetooth device using A2DP
  
• Advanced MultiUse allows you to have two active connections at the same time and switch between them whenever you please.
  
• Downloads your phonebook and tells you who is calling
  
• Dedicated mute button and large easy to access volume controls
  
• Bluetooth 2.1 + EDR technology
  
• Auto-pairing accompanied by audible pairing instructions for no-nonsense set-up
  
• Bluetooth 2.1 + EDR technology
  
• Jabra Discreet Light feature--the light indicator (LED) does not continually flash and you can turn it completely off in night drive mode
  
• Features answer/end, redial and voice dial (phone dependent)
  
• In-car cigarette lighter adapter charger with disconnectable USB cable so you can also charge it from your PC
  
• Up to 14 hours talk time and up to 20 days of standby time
  
• See a schematic image of all controls
  

Pairing the In-Car Speakerphone with Your Phone

1. When you turn on your Jabra CRUISER2 for the first time, the in-car speakerphone will automatically start up in pairing mode and begin to tell you what to do next
   
2. Activate Bluetooth on the phone
   
3. Press 'Yes' or 'OK' on the phone and confirm with PIN code 0000 (4 zeros)
   
4. Your phone will confirm when the pairing is complete
   
5. For later pairing: Turn your in-car speakerphone on. Press and hold the answer/end button until the Connection Status Icon light is flashing blue and the pairing instructions begins
   

Install It In Your Car After you have successfully paired you phone (or phones) to your Jabra CRUISER2, use the metal clip on the back of the in-car speakerphone to attach it to your sun visor. That's all the installation needed. You are now ready to drive responsibly.